Creating a PIN to Release Your Print Job

In order to release your print job, you’ll be required to authenticate on the printer from which you want to release the print job. If you don’t have, or aren’t eligible to receive, Mobile GOCard, or if you don’t have an NFC-enabled physical GOCard (issued after November 2020), you’ll need to create a PIN to authenticate. (Note: You must create a PIN before you can release your print job.) You’ll only need to create a PIN once; you can use that PIN to authenticate each time you release a print job.

  1. Go to the Georgetown printer portal.
  2. From the portal, log in with your NetID and password.
    Enter your NetID and password, and then click 'Log in'
  3. Click on the Change Details menu item located on the left-hand side of the screen.
    Click on the 'Change Details' menu item
  4. On the ‘Change Details’ page, perform the following:
    1. In the Change Card/ID PIN section, enter, and then re-enter to verify, your desired PIN. (Note: Your PIN must be between 6 and 12 numbers.) Click Change PIN when you’re done.
      Enter your PIN, and then click 'Change PIN'

      You should see the following confirmation message:
      Confirmation message that your PIN has been changed
    2. In the Change Card/ID Number section, enter your NetID, and then click Change Number. (In the example below, “jhoya123” is entered as the NetID.)
      Enter your NetID, and then click 'Change Number'

      You should see the following confirmation message:
      Confirmation message that your number (NetID) has been successfully updated.

You’ll now be able to release your print job.