Connecting to AnyConnect (iOS)

1. Tap on the AnyConnect icon.
   

   

2. If you see the following message, tap OK. 
   

   

3. Next to AnyConnect VPN, tap Add VPN Connection. 
   

   

4. In the Add VPN Connection screen, perform the following:
   • Add a description (e.g., Georgetown VPN) in the Description field.
   • Enter guvpn.georgetown.edu in the Server Address field.
   • Tap Save. 
     

     

5. In the next screen, you’ll see Georgetown VPN added to your connection list, as shown below:
   

   

6. In the same screen, move the slider to ON. AnyConnect will attempt to connect, as shown below. 
   

   

7. In the Authentication screen, perform the following: 
   • Enter your NetID in the Username field. (Note:  In the example below, “jhoya” is entered as the NetID.)
   • Enter your NetID password in the Password field. 
   • Tap Connect. 
     

     

8. If you connected to the Georgetown VPN successfully, you’ll see the message Connected in the Status field. You’ll also see a small “VPN” symbol in the upper right-hand corner of your screen.